0

Terms & Conditions

TERMS AND CONDITIONS – ONE-OFF REPAIR AND TECHNICAL SERVICES AGREEMENT

GARblex HOME SOLUTIONS
Effective Date: 20 November 2026
Last Updated: 20 November 2026

1. INTRODUCTION AND APPLICATION

These Terms and Conditions establish the contractual framework governing the provision of repair, maintenance, installation, inspection and other technical services by Garblex Home Solutions (hereinafter referred to as “Garblex”, “we”, “us” or “our”).

They apply to individual service engagements and one-off assignments accepted by Garblex. They should be read together with the applicable quotation, service order, invoice or other written confirmation issued for the engagement.

By accepting a quotation, confirming a booking, making an agreed deposit or authorising work to commence, the customer (“you” or “the customer”) agrees to these Terms and Conditions.

Where a specific written quotation or service agreement contains terms that expressly vary these provisions, the specific agreed terms will apply to that engagement to the extent of the inconsistency.

2. SCOPE AND NATURE OF SERVICES

Garblex Home Solutions provides integrated technical, property maintenance, renovation, installation and home improvement services to residential, commercial and institutional customers. Our objective is to deliver practical, reliable and professionally coordinated solutions for the maintenance, improvement, functionality and upkeep of buildings, properties, equipment and related infrastructure.

Our services may include, but are not limited to, the following:

A. Appliance and Equipment Solutions

  • Inspection, fault diagnosis, repair, servicing and preventive maintenance of domestic and commercial appliances.
  • Repair and maintenance of kitchen, laundry, refrigeration and other household equipment.
  • Inspection, repair and servicing of treadmills and other fitness and exercise equipment.

B. Security and Surveillance Solutions

  • Supply, installation, configuration and maintenance of CCTV systems and security cameras.
  • Installation and servicing of recording equipment, access control systems and related security infrastructure.
  • Technical support, troubleshooting and maintenance of electronic security installations.

C. Solar, Electrical and Electronic Solutions

  • Assessment, installation, configuration and maintenance of solar power systems and associated components.
  • Electrical installation, troubleshooting, repair and maintenance services.
  • Installation, servicing and maintenance of electronic systems and related technical equipment.

D. Property Renovation and Improvement

  • Residential and commercial property renovations, refurbishments and improvement works.
  • Interior and exterior finishing, painting, decorating and surface restoration.
  • Flooring, tiling, ceiling installation, partitioning and related finishing works.
  • Kitchen, bathroom and general interior upgrades.
  • Building repairs, alterations and property maintenance.

E. Plumbing, Carpentry and General Building Services

  • Plumbing installation, repairs, maintenance and replacement of related fittings and fixtures.
  • Carpentry, cabinetry, shelving, doors, fittings and general woodwork.
  • Masonry, plastering, concrete repairs and other general building works.
  • Roof, drainage and other property maintenance works, where applicable.

F. Installation, Fabrication and General Home Solutions

  • Assembly, mounting, installation and replacement of household and commercial fixtures, fittings and equipment.
  • Metalwork, fabrication, welding and related installation services.
  • General property maintenance, repairs, improvements and other agreed technical or support services.

The above categories describe the general range of services that Garblex may provide. The availability of a particular service will depend on its technical requirements, project scope, resources, site conditions and any applicable regulatory or licensing requirements.

The specific services, deliverables, materials, technical specifications, charges and completion arrangements for each engagement shall be defined in the relevant quotation, service order or written agreement accepted by the customer.

Any service, component, material or additional work not expressly included in the agreed scope shall be excluded unless separately assessed, quoted and authorised by the customer.

Garblex reserves the right to decline, subcontract or arrange specialist support for work that falls outside its available technical capabilities, operational resources, safety requirements or lawful scope of operations. Where subcontracting or specialist support is proposed, the relevant arrangements shall be communicated to the customer.

3. QUOTATIONS, ESTIMATES AND AUTHORISATION

3.1 Basis of Quotations and Estimates

All quotations and estimates issued by Garblex Home Solutions (“Garblex”) are prepared using the information, specifications, site conditions and requirements reasonably available at the time of assessment. They may take into consideration the nature of the requested services, labour requirements, materials, equipment, transportation, technical complexity, project duration and other relevant operational costs.

Where the full extent of the required work cannot reasonably be established without further inspection, testing, measurements, dismantling, investigation or site assessment, any preliminary estimate shall be treated as indicative and may be revised following further assessment.

3.2 Validity of Quotations

Unless otherwise stated, quotations are valid for fourteen (14) days from the date of issue. Acceptance after this period shall be subject to reconfirmation by Garblex.

A quotation may be reviewed or revised where there is a material change in the scope of work, technical requirements, site conditions, material specifications, parts availability, supplier pricing, labour requirements, project duration or other circumstances affecting the original cost assessment.

3.3 Scope and Specification of Quoted Work

Each quotation shall, as applicable, identify the proposed services, work description, deliverables, materials, equipment, specifications, estimated costs and any relevant conditions or exclusions.

For projects involving installations, renovations, building works, fabrication, solar systems, CCTV, electrical installations or other substantial works, the quotation may also specify relevant measurements, quantities, technical requirements, project stages, completion estimates and payment milestones.

Unless expressly included, a quotation does not cover additional work, concealed defects, unforeseen site conditions, upgrades, variations or services outside the stated scope.

3.4 Additional Work and Variations

Where inspection, diagnosis or execution of the agreed work reveals additional requirements, unforeseen defects, unsuitable conditions or a need to modify the original scope, Garblex will communicate the relevant findings and any material cost or schedule implications to the customer.

Additional work or material variations will not ordinarily proceed without the customer’s approval. Any approved variation may be documented through a revised quotation, supplementary quotation, written instruction, email or another verifiable form of authorisation.

Where an urgent intervention is reasonably necessary to address an immediate safety risk or prevent further damage, Garblex may recommend appropriate protective action and seek the customer’s approval before undertaking chargeable additional work, except where otherwise lawfully authorised.

3.5 Customer Review and Acceptance

The customer is responsible for reviewing the quotation and confirming that the described services, specifications, quantities, materials, pricing, payment conditions, exclusions and other stated requirements accurately reflect the intended engagement.

Acceptance may be provided through a signed quotation, written message, email, purchase order or another verifiable form of confirmation recognised by Garblex.

Where a customer issues a purchase order or other formal instruction, the engagement shall remain subject to Garblex’s confirmation and any agreed terms applicable to the work.

3.6 Authority to Approve Work

The person accepting a quotation, approving additional work or issuing instructions on behalf of the customer must have the necessary authority to commit the customer to the engagement.

Where instructions are issued by a property owner, tenant, property manager, company representative, contractor or other appointed person, Garblex may reasonably rely on the representation that such person is authorised to approve the relevant work.

The customer remains responsible for obtaining any internal, ownership, landlord, management or other third-party approvals required before work commences.

3.7 Estimates, Completion Periods and Technical Assumptions

Any estimated cost, delivery date, project duration or completion period is based on the assumptions and information available when the quotation is prepared. Unless expressly confirmed as binding in writing, such estimates are indicative and may be affected by supplier lead times, weather, access restrictions, site readiness, availability of materials, additional findings, customer instructions and other circumstances beyond Garblex’s reasonable control.

Garblex will communicate material changes that may reasonably affect the agreed cost, scope or anticipated completion schedule.

3.8 Procurement and Commitment of Resources

Where a quotation involves the purchase of materials, components, equipment, custom-made items or specialist services, procurement may commence after the required approval and any applicable deposit or advance payment have been received.

The customer acknowledges that supplier orders, customised materials, mobilisation, allocation of personnel and other project-specific commitments may create costs that cannot reasonably be reversed or recovered if the engagement is subsequently changed or cancelled. Such costs shall be handled in accordance with the agreed payment and cancellation terms and applicable law.

3.9 No Obligation to Commence Without Approval

Garblex shall not be obliged to commence chargeable work until the relevant quotation or scope has been accepted and any stated commencement conditions, including required deposits, approvals, access arrangements or site preparations, have been satisfied.

Any preliminary inspection, assessment or consultation shall not, by itself, constitute approval to undertake further chargeable work.

3.10 Records of Approval

Quotations, revised quotations, customer instructions, approvals and agreed variations may be retained by Garblex as part of the engagement record. Such records may be used to establish the agreed scope, pricing, instructions and responsibilities of the parties, subject to applicable data protection and other legal requirements.

4. PRICING, FEES AND PAYMENT

4.1 Service Charges

The customer shall pay the fees and charges set out in the quotation, service order or invoice accepted for the engagement. Depending on the nature, scope and complexity of the services, the total cost may comprise:

  • Inspection, assessment, diagnostic and call-out fees.
  • Professional, technical and labour charges.
  • Installation, repair, maintenance and project execution costs.
  • Replacement parts, equipment, fittings, materials and consumables.
  • Transportation, delivery, handling and other agreed logistical expenses.
  • Specialist services, subcontracted work or third-party costs approved by the customer.
  • Additional work or variations authorised after the original quotation.

4.2 Quotations and Price Confirmation

Unless expressly stated otherwise, all quotations are based on the information, specifications and site conditions available at the time of preparation. Where inspection, dismantling or further assessment is necessary, the initial estimate may be revised following the findings.

A quotation shall remain valid for the period stated in it. Any change in scope, specifications, material requirements, supplier pricing or project conditions may require a revised quotation.

No additional charge shall be imposed for work outside the approved scope without first communicating the proposed cost and obtaining the customer’s authorisation, except where an immediate action is reasonably necessary to address an urgent safety risk, in which case the customer shall be informed as soon as practicable.

4.3 Inspection and Call-Out Fees

Applicable inspection, assessment, diagnostic or call-out charges shall be communicated before the relevant visit or assessment is undertaken.

Such charges cover the attendance, time, expertise and assessment involved and may remain payable even where the customer decides not to proceed with the recommended repair or service, provided the charges were disclosed and agreed in advance.

4.4 Deposits and Advance Payments

Garblex may require a deposit or advance payment before commencing work, purchasing materials, reserving equipment, scheduling specialist resources or mobilising for a project.

The required amount, payment deadline and applicable conditions shall be stated in the quotation or written service confirmation.

Procurement, mobilisation or commencement of work may be conditional upon receipt of the agreed deposit. The customer acknowledges that certain materials, components and equipment may need to be specially ordered or procured for the engagement.

4.5 Progress and Staged Payments

For renovation, installation, construction-related, refurbishment or other extended engagements, payments may be structured in stages according to agreed project milestones.

The quotation or service agreement shall specify the applicable payment schedule, milestone descriptions and amounts or percentages payable.

Where a scheduled payment becomes due, Garblex may reasonably suspend further work, procurement or mobilisation pending receipt of the payment. Any resulting effect on the project schedule shall be communicated to the customer.

4.6 Payment of Outstanding Balances

Unless otherwise agreed in writing, the outstanding balance shall become payable upon completion of the agreed services or in accordance with the payment schedule stated in the quotation or invoice.

Completion shall be assessed against the agreed scope of work. Where a project involves several distinct stages or deliverables, payment obligations may arise separately for each completed stage as agreed.

The customer shall settle invoices within the stated payment period. Where no payment period is specified, payment shall be due upon presentation of the invoice.

4.7 Accepted Payment Methods

Payments may be made through the following accepted channels:

  • M-Pesa.
  • Bank transfer to the designated Garblex business bank account.
  • Cash, where expressly accepted by Garblex.

Bank account details and payment instructions shall be provided on the relevant quotation, invoice or official payment communication.

Payment shall be regarded as received once the funds have been successfully credited to and confirmed in Garblex’s designated account. A transfer instruction, deposit slip, transaction screenshot or pending payment notification shall not, by itself, constitute confirmation of completed payment.

Customers should use the applicable invoice or quotation reference when making payments to facilitate accurate allocation and reconciliation.

Garblex shall provide an appropriate payment acknowledgement or receipt in accordance with applicable requirements.

4.8 Additional Work and Variations

Any request to change the original scope, specifications, materials, design or agreed deliverables shall be treated as a variation.

Garblex shall assess the effect of the proposed variation on pricing, resources and completion timelines and communicate any revised charges for the customer’s approval before proceeding.

Work arising from concealed defects, unforeseen site conditions or additional requirements discovered after commencement shall be treated separately where it falls outside the original agreed scope.

4.9 Overdue Payments and Suspension of Services

Where an amount remains unpaid beyond the agreed payment period, Garblex may issue a payment reminder and, subject to applicable law and the agreed engagement terms, suspend further work, procurement, delivery or other outstanding obligations until the payment position is resolved.

Any reasonable additional costs directly arising from an approved change in schedule or remobilisation may be communicated to the customer for agreement.

4.10 Invoice Queries and Payment Obligations

Any concern or discrepancy relating to an invoice should be raised promptly and supported by relevant details.

The parties shall endeavour to resolve genuine billing disputes in good faith. Raising a query shall not automatically suspend the obligation to settle amounts that are undisputed and properly due.

Nothing in this section shall be interpreted as permitting charges that were not properly disclosed, agreed or otherwise lawfully payable.

5. SERVICE DELIVERY AND PERFORMANCE

Garblex will perform the agreed services with reasonable care, skill and diligence, having regard to the nature of the work and the information available.

Appointment dates, attendance times, estimated completion dates and delivery schedules are provided in good faith. They are estimates unless expressly confirmed as binding in writing. Delays may arise from technical complications, supplier availability, transport, access restrictions or circumstances beyond our reasonable control.

Where a material delay or change affects the engagement, we will endeavour to communicate the relevant information and agree on the appropriate next steps.

Our obligation is to perform the agreed scope of work. We do not guarantee that equipment will be repairable, that every fault can be identified immediately or that a repair will eliminate unrelated or underlying defects.

6. CUSTOMER RESPONSIBILITIES

The customer shall:

  • Provide accurate information about the equipment, property, reported fault and relevant service history.
  • Arrange safe and reasonable access to the premises, equipment and work areas.
  • Ensure that an authorised adult or representative is available where access or approval is required.
  • Disclose known safety risks, hazardous conditions, previous modifications or existing damage.
  • Secure or remove valuables, confidential materials and personal belongings from the work area where reasonably necessary.
  • Obtain any permissions, landlord approvals, building access permissions or other consents required for the work.
  • Review and approve any proposed variation to the agreed scope or price.
  • Follow operating, maintenance and safety instructions provided after completion.

Garblex may suspend or decline work where access is unavailable, conditions are unsafe, required approvals have not been obtained or the customer has not provided essential information. Any resulting delay or additional attendance cost will be discussed with the customer.

7. PARTS, MATERIALS AND EQUIPMENT

7.1 Identification and Approval of Parts

Where replacement parts, materials or equipment are required, Garblex Home Solutions (“Garblex”) will, where reasonably practicable, communicate their description, applicable specifications, cost and any relevant conditions as part of the quotation or subsequent written approval. No material additional cost will be incurred without the customer’s approval, except where otherwise agreed.

7.2 Sourcing and Component Selection

Parts and materials may be sourced from manufacturers, authorised distributors, independent suppliers or other commercially suitable sources. Depending on availability, technical requirements and the nature of the work, Garblex may propose original manufacturer parts, compatible alternatives, refurbished components or equivalent products. Any material distinction that may reasonably affect the customer’s decision will be disclosed before approval.

7.3 Availability and Supplier Delays

The availability, suitability and delivery of parts and materials may depend on supplier stock, manufacturer production schedules, importation, transport and other external factors. These circumstances may affect the estimated completion date. Garblex will communicate significant delays or changes and, where reasonably practicable, discuss suitable alternatives with the customer.

Garblex shall not be responsible for delays arising from circumstances beyond its reasonable control, including supplier shortages, discontinued products, shipping delays or manufacturer restrictions.

7.4 Customer-Supplied Parts and Equipment

Customers may supply parts or equipment for installation or use, subject to prior assessment and acceptance by Garblex. All customer-supplied items must be suitable, compatible and safe for their intended application.

Garblex reserves the right to decline, suspend or discontinue work involving any item that is defective, counterfeit, incompatible, unsafe, unsuitable or likely to compromise the quality or safety of the work.

Where Garblex agrees to install customer-supplied items, any applicable workmanship warranty shall relate only to the installation work performed by Garblex. It shall not cover defects, failures, performance limitations or other faults inherent in the supplied items.

7.5 Manufacturer and Supplier Warranties

Where parts or equipment are supplied with a manufacturer’s or supplier’s warranty, the applicable warranty terms, conditions and exclusions shall apply. Any available warranty documentation or relevant information will be communicated or provided to the customer where reasonably practicable.

Unless expressly agreed in writing, Garblex does not independently extend or replace a manufacturer’s warranty or guarantee the continued availability of replacement parts.

7.6 Removed and Replaced Components

Removed or replaced components shall be returned to the customer where this has been requested or agreed. Where no specific arrangement has been made, Garblex may retain, recycle or dispose of such components in a reasonable and lawful manner, taking account of their condition, value and any applicable legal requirements.

The customer should communicate any request to retain removed components before work is completed.

8. INSPECTION, ASSESSMENT, DIAGNOSIS AND PROJECT FEASIBILITY

8.1 Initial Inspection and Assessment

Depending on the nature of the requested service, Garblex Home Solutions (“Garblex”) may undertake an inspection, site visit, technical assessment, measurements, testing, diagnosis or project feasibility review before providing or commencing the proposed work.

These assessments may relate to appliances and equipment, electrical and electronic systems, CCTV and security installations, solar systems, plumbing, carpentry, renovations, building works, fabrication, property maintenance, installations and other home or commercial solutions offered by Garblex.

Garblex will exercise reasonable care and professional diligence when carrying out inspections and assessments.

8.2 Scope and Limitations of Assessments

The extent of an inspection or assessment will depend on the nature of the service, accessibility of the relevant area or equipment, available information, site conditions and the technical resources reasonably required.

An initial inspection, quotation or preliminary assessment may not identify every underlying defect, structural concern, concealed installation issue, material deficiency or other condition affecting the proposed work. Further investigation, testing, dismantling, opening up of structures or specialist assessment may be necessary.

8.3 Additional Findings and Unforeseen Conditions

During the execution of a project or service, additional defects, hidden damage, unsafe conditions, unsuitable materials, structural concerns, incompatible installations or other unforeseen circumstances may become apparent.

Where such findings materially affect the scope, cost, materials, safety requirements, technical approach or completion schedule, Garblex will communicate the relevant findings to the customer and, where additional work is required, seek approval before proceeding.

Any additional work, variations or materials outside the agreed scope shall be subject to separate approval and applicable charges.

8.4 Inspection, Site Visit and Diagnostic Charges

Inspections, consultations, site visits, measurements, testing, technical diagnosis, feasibility assessments and other preliminary services may attract separate charges.

Any applicable fee will be communicated and agreed with the customer before the relevant service is undertaken. The customer remains responsible for charges properly disclosed and agreed, whether or not the customer subsequently proceeds with the proposed project or service.

8.5 Technical Impracticality and Unsuitable Conditions

Garblex may determine that a proposed repair, installation, renovation, construction activity or other service is technically impractical, unsafe, uneconomical, unsuitable or outside its reasonable technical capacity.

Such a determination may arise from equipment condition, structural integrity, site accessibility, material availability, existing installations, regulatory requirements, safety considerations, project complexity or other relevant circumstances.

Where appropriate, Garblex may recommend an alternative approach, further specialist assessment, additional preparatory work, replacement of affected equipment or materials, or discontinuation of the proposed work.

8.6 Customer Approval and Discontinuation

Where further findings materially change the original proposal, Garblex will communicate the relevant information and obtain the customer’s approval before undertaking additional work, except where immediate action is reasonably necessary to address an urgent safety concern or prevent further damage, subject to applicable law and any agreed authority.

Garblex reserves the right to decline, suspend or discontinue work where proceeding would create an unreasonable safety risk, breach applicable requirements, compromise the quality of the work or exceed its reasonable technical capacity.

The customer remains responsible for authorised inspection, assessment, diagnostic, labour, materials, dismantling, site attendance and other charges properly incurred up to the point of discontinuation, in accordance with the agreed terms.

8.7 Existing Conditions and Reinstatement

Where a service involves dismantling, excavation, opening walls, ceilings, floors or other structures, removing fittings, accessing concealed installations or disturbing existing finishes, Garblex will exercise reasonable care in carrying out the authorised work.

Existing deterioration, concealed defects, structural weaknesses, previous modifications, corrosion, fragile materials or unsuitable construction may affect the ability to restore an affected area or item to its original condition.

Reinstatement, finishing, repainting, replacement of damaged pre-existing materials or other restoration work shall be included only where specified in the accepted quotation or separately agreed with the customer.

8.8 Recommendations and Assessment Outcomes

Any technical findings, recommendations, measurements, estimates or feasibility opinions provided by Garblex will be based on the information and conditions reasonably available at the time of assessment. Recommendations may be revised if further information, testing or site conditions reveal additional requirements.

Where a project requires specialist engineering, architectural, structural, statutory or other professional assessment, Garblex may recommend engagement of an appropriately qualified or authorised professional before the relevant work proceeds.

9. CANCELLATION, RESCHEDULING, SUSPENSION AND TERMINATION

9.1 Customer Cancellation and Rescheduling

The customer should notify Garblex Home Solutions (“Garblex”) as early as reasonably possible when cancelling, postponing or requesting a change to an appointment, site visit, installation, repair, maintenance activity or project schedule.

All cancellation and rescheduling requests should be communicated through an agreed or official communication channel. Any revised appointment or project schedule will be subject to availability, resource allocation, supplier arrangements and other relevant operational considerations.

9.2 Cancellation Before Work Commences

Where an engagement is cancelled before work commences, the customer may remain responsible for reasonable costs already incurred specifically for that engagement, including approved inspection charges, special procurement, supplier commitments, transport or other non-recoverable expenses, subject to the agreed quotation and applicable law.

9.3 Cancellation After Work Has Commenced

Where an engagement is cancelled after work has commenced, the customer shall be responsible for:

  • The value of work properly completed up to the effective cancellation date.
  • Parts, materials and equipment purchased or specially procured for the engagement, where such costs cannot reasonably be recovered.
  • Reasonable labour, transport, mobilisation and other costs properly incurred.
  • Any other charges expressly agreed in the relevant quotation, service order or written agreement, subject to applicable law.

Garblex will provide a reasonable account of applicable charges where requested.

9.4 Deposits and Advance Payments

Deposits and advance payments will be reconciled against completed work, approved procurement, committed expenses and other charges properly incurred under the engagement.

Any amount remaining refundable to the customer will be calculated and processed in accordance with the agreed terms and applicable Kenyan law.

Where the costs properly incurred exceed the amount already paid, the customer remains responsible for any outstanding balance, subject to the agreed contractual terms and applicable law.

9.5 Project-Specific Cancellation and Procurement

For renovations, construction, fabrication, installations, supply-and-installation engagements and other projects involving advance procurement or allocation of labour and resources, cancellation may result in costs relating to specially ordered materials, supplier commitments, custom-made items, mobilisation, preparatory work and completed project stages.

Such costs will be assessed against the agreed quotation, project terms and work actually undertaken. Garblex will not charge for unperformed work merely because an engagement has been cancelled, except for properly agreed cancellation charges or recoverable costs permitted by law.

9.6 Suspension of Services

Garblex may suspend or temporarily withhold services where:

  • An agreed payment obligation remains outstanding.
  • The customer fails to provide necessary access, information, approvals or cooperation.
  • Site conditions present an unreasonable safety risk.
  • The customer requests work that is unlawful, unsafe or outside applicable regulatory requirements.
  • Required materials, equipment, permits or specialist approvals are unavailable.
  • The customer materially breaches the agreed scope or these Terms and Conditions.

Where reasonably practicable, Garblex will notify the customer of the reason for suspension and any action required before work can resume.

Any resulting delay, remobilisation or additional cost will be addressed in accordance with the agreed terms and applicable law.

9.7 Termination by Garblex

Garblex may terminate an engagement where the customer materially breaches the agreed terms, fails to remedy a notified issue within a reasonable period, repeatedly fails to meet payment obligations, creates an unacceptable safety risk or requires unlawful or technically inappropriate work.

Where reasonably practicable, Garblex will provide notice and an opportunity to remedy the issue before termination. Immediate suspension or termination may be necessary where continuing the engagement would create a serious safety, legal or operational risk.

9.8 Consequences of Termination

Termination or cancellation does not remove the customer’s obligation to pay for services properly performed, materials supplied, approved procurement and reasonable costs properly incurred before the effective termination date.

Any outstanding balance, refundable amount, materials awaiting collection, partially completed work and other relevant matters will be reconciled between the parties in accordance with the agreed terms and applicable law.

9.9 Return of Customer Property and Materials

Where an engagement is terminated, Garblex and the customer will make reasonable arrangements for the collection or return of customer-owned equipment, materials or other property in Garblex’s possession, subject to any lawful right to retain property and any outstanding payment arrangements.

9.10 Rights and Obligations That Continue

Termination does not affect rights, obligations or liabilities that accrued before termination or provisions that are intended by their nature to continue after the engagement ends, including payment obligations, confidentiality, applicable warranties and dispute resolution.

10. WORKMANSHIP WARRANTY

10.1 Warranty Period

Unless a different warranty period is expressly stated in writing, workmanship performed by Garblex Home Solutions (“Garblex”) is covered by a limited warranty of three (3) months from the date the relevant work, service or project is completed.

This warranty applies to services undertaken by Garblex, including repairs, maintenance, installations, renovations, electrical and electronic work, CCTV and security systems, solar installations, plumbing, carpentry, fabrication, building works, property improvements and other agreed home or commercial solutions.

10.2 Scope of Workmanship Warranty

The warranty covers defects directly attributable to the workmanship performed by Garblex under the relevant quotation, service order or written agreement.

The warranty applies only to the specific work carried out and does not automatically extend to the entire appliance, equipment, system, installation, structure or property where only a particular fault, component, area or part of the project was serviced or worked on.

10.3 Warranty Exclusions

The workmanship warranty does not cover faults, damage, deterioration or failures arising from:

  • Normal wear and tear, ageing, corrosion, deterioration or the natural characteristics of materials.
  • Misuse, negligence, accidents, vandalism or physical damage occurring after completion of the work.
  • Improper operation, unauthorised alterations, modifications, interference or repairs by third parties.
  • Power fluctuations, electrical surges, lightning, water ingress, flooding, fire, pests or environmental conditions outside the agreed scope of work.
  • Unrelated, concealed or pre-existing faults, defects or structural conditions not included in the original service engagement.
  • Defective, unsuitable, counterfeit or customer-supplied parts, materials or equipment.
  • Failure to follow reasonable operating, care, safety or maintenance instructions provided by Garblex or the relevant manufacturer.
  • Inadequate maintenance, neglect or failure to carry out recommended servicing.
  • Structural movement, settlement, external water penetration, ground conditions or other site-related factors beyond the agreed scope of work.
  • Changes in performance or appearance resulting from normal material characteristics, environmental exposure or conditions not caused by defective workmanship.

10.4 Third-Party Products and Manufacturer Warranties

Parts, equipment, appliances, materials and products supplied by third-party manufacturers, distributors or suppliers remain subject to their respective warranty terms, conditions and exclusions.

Where applicable, Garblex will communicate available manufacturer or supplier warranty information and may assist the customer with a warranty claim where reasonably practicable. Unless expressly agreed in writing, Garblex does not independently extend or replace a third-party product warranty.

10.5 Reporting a Warranty Concern

Where a customer identifies a possible workmanship defect, the customer should notify Garblex promptly, preferably within the applicable warranty period, and provide reasonable details of the concern together with proof of the original service, quotation, invoice or other relevant service record.

The customer should, where reasonably practicable, allow Garblex an opportunity to inspect the affected work before engaging another service provider to alter or repair it. This does not prevent the customer from taking reasonable steps to address an immediate safety risk or prevent further damage.

10.6 Inspection and Warranty Assessment

Garblex may inspect, test or assess the affected work to establish whether the reported issue is covered by this warranty. The assessment may include reviewing the original scope of work, materials used, operating conditions, maintenance history and any subsequent alterations or interference.

Where the reported issue is not attributable to workmanship performed by Garblex, any further inspection, repair, replacement or corrective work may be subject to a separate quotation and customer approval.

10.7 Remedies for Valid Workmanship Defects

Where a defect directly attributable to Garblex’s workmanship is established within the applicable warranty period, Garblex will determine and provide an appropriate remedy, which may include correcting the affected workmanship or carrying out reasonable remedial work, subject to the nature of the service and applicable law.

Any remedy will be limited to the affected work covered by the warranty unless a wider remedy is required by law or expressly agreed in writing.

10.8 Conditions and Limitations

The warranty is not transferable unless otherwise agreed in writing. Any remedial work carried out under this warranty does not automatically restart or extend the original warranty period, unless expressly agreed or required by applicable law.

Nothing in this section excludes, restricts or limits any consumer rights, statutory warranties or remedies that cannot lawfully be excluded or limited under the laws of Kenya.

11. PROPERTY, SAFETY AND SITE CONDITIONS

Garblex will take reasonable precautions to protect the customer’s premises and property while performing the agreed services.

The customer is responsible for informing Garblex of concealed utilities, structural restrictions, access limitations and other site conditions that may affect the work.

Installation or repair work may require drilling, mounting, cable routing, access panels or other physical alterations where included in the approved scope. The nature and extent of such work should be agreed before it is undertaken.

Any pre-existing damage, unsafe condition or defect discovered during the engagement may be brought to the customer’s attention. Garblex may suspend affected work where continuing would create an unreasonable safety risk.

12. LIMITATION OF LIABILITY

12.1 Standard of Care

Garblex Home Solutions (“Garblex”) will exercise reasonable care, skill and diligence in performing the services agreed with the customer, having regard to the nature, scope and technical requirements of the relevant engagement.

Garblex will undertake work in accordance with the agreed quotation, service order or written agreement and applicable legal and regulatory requirements.

12.2 Customer Information and Existing Conditions

Garblex shall not be responsible for loss, damage, delay or additional costs arising directly from inaccurate, incomplete or misleading information supplied by the customer, provided that Garblex could not reasonably have identified the issue before relying on that information.

Garblex shall also not be responsible for defects, damage or unsafe conditions that existed before commencement of the agreed work, unless such loss or damage is caused or worsened by Garblex’s failure to exercise reasonable care.

12.3 Third-Party Actions and External Circumstances

To the extent permitted by law, Garblex shall not be responsible for loss, damage or delays arising from:

  • Unauthorised interference, alterations, repairs or modifications by third parties.
  • Misuse, negligence or failure by the customer or other persons to follow reasonable operating, care or maintenance instructions.
  • Defective equipment, materials or components supplied by the customer or third parties, where the relevant defect was not caused by Garblex.
  • Supplier shortages, manufacturer restrictions, transport delays or other supply-chain disruptions beyond Garblex’s reasonable control.
  • Power interruptions, electrical fluctuations, flooding, fire, extreme weather or other external events beyond Garblex’s reasonable control.
  • Site conditions, concealed defects, structural weaknesses or pre-existing installation problems that were not reasonably identifiable during the agreed assessment.

This provision does not exclude liability for loss or damage caused by Garblex’s own negligence, breach of contract or failure to exercise reasonable care where such liability cannot lawfully be excluded.

12.4 Indirect and Consequential Losses

To the extent permitted by Kenyan law, Garblex shall not be liable for indirect or consequential losses that were not reasonably foreseeable when the relevant engagement was agreed.

Such losses may include loss of anticipated profits, business interruption, loss of opportunity, loss of use or other financial consequences arising indirectly from a service delay, equipment failure or project disruption.

This provision does not exclude direct losses or remedies that are recoverable under applicable law.

12.5 Property, Equipment and Site-Related Risks

Where work involves existing buildings, structures, equipment, installations, utilities, finishes or other property, Garblex will exercise reasonable care in carrying out the authorised work.

Garblex shall not be responsible for deterioration, failure or damage attributable to pre-existing defects, concealed conditions, structural weaknesses, unsuitable materials or other circumstances outside the agreed scope, except to the extent caused by Garblex’s failure to exercise reasonable care.

Where the work may reasonably expose an existing defect or require additional remedial work, Garblex will communicate material findings to the customer and seek approval for additional work where required.

12.6 Responsibility for Agreed Scope

Garblex’s responsibility in each engagement shall relate to the services, materials, deliverables and work expressly included in the accepted quotation, service order or written agreement.

Work not included in the agreed scope, including additional repairs, replacement of unrelated components, structural improvements, reinstatement, finishing or corrective work arising from pre-existing conditions, shall require separate assessment and approval.

12.7 Liability Under Applicable Law

Where liability arises from Garblex’s failure to perform the agreed services with reasonable care and skill, the customer’s rights and remedies shall be determined in accordance with the applicable laws of Kenya and the specific circumstances of the engagement.

Nothing in these Terms and Conditions excludes, restricts or limits liability for fraud, wilful misconduct, negligence causing death or personal injury, or any other liability that cannot lawfully be excluded or restricted.

Nothing in this section limits any consumer rights, statutory protections or remedies available to the customer under Kenyan law.

13. CONFIDENTIALITY AND DATA PROTECTION

Garblex may collect and process personal information such as customer names, contact details, service addresses, equipment information, payment records and service history for purposes connected with providing services, managing customer relationships, processing payments and meeting legal obligations.

Personal information will be handled in accordance with the Kenya Data Protection Act, 2019 and other applicable data protection requirements.

Information may be shared with relevant service providers, suppliers or professional advisers where reasonably necessary to fulfil the engagement or meet legal obligations. We will not knowingly use customer information for unrelated purposes without an appropriate lawful basis.

Customers should not provide access credentials, passwords or sensitive information unless reasonably necessary for the agreed service. Where access is required, the customer should use secure arrangements and change temporary credentials after completion where appropriate.

14. FORCE MAJEURE AND EVENTS BEYOND OUR CONTROL

Neither party shall be treated as having breached these terms to the extent that performance is prevented or materially delayed by circumstances beyond reasonable control, including severe weather, natural disasters, fire, civil disturbance, government restrictions, transport disruption, widespread utility failures or significant supplier interruptions.

The affected party should notify the other party as soon as reasonably practicable. Both parties shall use reasonable efforts to minimise the impact and agree on revised arrangements where necessary.

15. COMPLAINTS AND CUSTOMER SUPPORT

Garblex is committed to addressing customer concerns professionally and fairly. A customer who is dissatisfied with the service should contact us with the relevant quotation, invoice or service details and a clear description of the concern.

We will review the matter, request further information where necessary and endeavour to provide a reasonable response. Where a technical inspection is required, appropriate arrangements will be discussed with the customer.

Nothing in this process prevents a customer from exercising any statutory rights or referring a dispute to a competent authority or court.

16. GOVERNING LAW AND DISPUTE RESOLUTION

These Terms and Conditions are governed by the laws of the Republic of Kenya.

The parties should first endeavour to resolve any dispute through good-faith communication and reasonable negotiation. Where a resolution cannot be reached, either party may pursue the remedies available through the appropriate legal or dispute-resolution process in Kenya.

17. GENERAL CONTRACTUAL PROVISIONS

Entire agreement: These Terms and Conditions, together with the accepted quotation and any written service-specific agreement, form the agreement between the parties concerning the relevant engagement.

Amendments: Any material variation to the agreed scope, price or service conditions should be documented and approved by the parties.

Severability: If any provision is found to be invalid or unenforceable, the remaining provisions shall continue to apply to the extent permitted by law.

No waiver: A failure or delay by either party to enforce a provision shall not, by itself, amount to a waiver of that provision.

Rights under law: These terms are not intended to remove or diminish any rights that cannot lawfully be excluded under Kenyan law.

18. ACCEPTANCE AND EFFECTIVE DATE

These Terms and Conditions take effect on 20 November 2026 and apply to service engagements accepted by Garblex Home Solutions on or after that date.

Engagements accepted before the effective date remain subject to the terms agreed at the time of booking, unless the parties expressly agree otherwise in writing.

Acceptance may be evidenced by approval of a quotation, written booking confirmation, payment of an agreed deposit or authorisation for work to commence.

19. CONTACT INFORMATION

Garblex Home Solutions
Website: https://garblex.co.ke
Telephone: 0727 077 723

Thank you for choosing Garblex Home Solutions. We are committed to delivering professional technical services and reliable home solutions.

CallWhatsApp